Custom USB-C PD Fast Charging PCBA Design Manufacturing Turnkey ODM Service
Product Summary
Custom USB-C PD fast charging PCBA with turnkey ODM development. We deliver schematic design, PCB layout, component sourcing, DFM/DFA review, SMT and DIP assembly, firmware development, functional testing and box-build assembly. Our engineers develop the charging board and PD firmware around your product and cut your BOM cost while shortening your time to market.
Product Custom Attributes
Custom USB-C PD Fast Charging PCBA
,PD Protocol Firmware Integration
,BOM Cost Reduction Service
Basic Properties
Trading Properties
Product Description
Custom USB-C PD Fast Charging PCBA
USB Power Delivery fast-charging boards engineered around your charger, dock or device, with turnkey ODM development that speeds up your launch and lowers your total cost. We design, build and optimize — from schematic to a boxed, ready-to-ship product.
One-Stop Engineering & Manufacturing Capabilities
| Schematic Design | USB-C PD circuit capture, power-stage and controller selection for your target wattage profile. |
| PCB Layout | High-current, thermal- and EMC-conscious routed layouts designed for compact chargers and docks. |
| Component Sourcing | BOM scrubbing, authorized-channel sourcing and PD-controller availability planning. |
| DFM / DFA Review | Manufacturability and assembly feedback before tooling to prevent costly re-spins. |
| SMT and DIP Assembly | High-speed SMT plus through-hole DIP, wave/selective soldering and AOI inspection. |
| Firmware Development | PD protocol stack bring-up, voltage/current negotiation, safety logic and OTA firmware. |
| Functional Testing | ICT, FCT, load and PD-compliance test fixtures with custom test-jig programming. |
| Box-Build Assembly | Enclosure integration, harness and connector mating, sealing and finished-goods packing. |
| Prototype and Mass Production | Rapid NPI samples, pilot build and scalable volume ramp on a single process. |
Customization and R&D Capability
Our engineers custom-develop the charging board and its firmware for your product, so the power stage fits your form factor, wattage and protocol requirements.
- ODM design-in — controller, power stage and port configuration tailored to your wattage and port count.
- Hardware and firmware co-development — PD protocol negotiation, protection logic and code built together on the board.
- Protection engineering — over-voltage, over-current, over-temperature and short-circuit safeguards built in.
- Feature expansion — add multi-port, display, GaN power stage or pass-through data to an existing platform.
- Confidential development — NDA-protected engineering with clear design ownership for your brand.
Cost Reduction and Efficiency for Your Project
We do more than populate boards — we lower your total cost and shorten your time to market.
| BOM cost optimization | Cross-reference the BOM to equivalent parts that cut unit cost without sacrificing efficiency or safety. |
| Design cost-out | Simplify layer count, consolidate passives and remove redundant parts early in the design. |
| Consolidated sourcing | One supplier, one BOM, fewer purchase orders and less overhead. |
| Faster NPI | Rapid prototyping and DFM feedback compress the design-build-test loop. |
| Supply chain resilience | Qualified second sources reduce stock-out and price-spike risk. |
From Bare Board to Finished Product (Box-Build)
A bare PCBA is only a component. This service carries the board all the way into a finished charging product that ships ready to sell.
- Schematic Design — lock the electrical architecture.
- PCB Layout — deliver a manufacturable, high-current and EMC-conscious board.
- Component Sourcing — secure the BOM through trusted channels.
- DFM / DFA Review — de-risk the build before tooling.
- SMT and DIP Assembly — populate and solder the PCBA.
- Firmware Development — bring the board and PD protocol to life.
- Functional Testing — verify every function passes.
- Box-Build Assembly — fit the PCBA into the enclosure, wire harnesses and connectors, then seal and finish the unit into a complete product.
- Prototype and Mass Production — start with samples, then ramp to volume with the same process.
Send us your spec, schematic or 3D model
We will return a DFM summary, a BOM cost-reduction proposal and a prototype-to-production plan.
-
JGood turnkey PCBA service. Component sourcing, PCB fabrication, assembly and testing were handled smoothly, and the finished boards worked as expected in our product.
-
FA cost-effective, drop-in replacement that meets all our safety and durability standards.
-
WTheir engineering team was able to adjust the design based on our feedback quickly. That made the OEM project much easier to manage.
Contact Our Experts And Get A Free Consultation!
Our mission is to offer "High Quality" & "Good Service" & "Fast Delivery" to help our clients to gain more profits.
